MISCELLANEOUS

Target Plotters
	Gerber III/IV, S/750 Sprint Series Lettersmith.
	Anagraph Excel 1/1m
	Compugraphy

Limited to cutting 1/2" letters and up. For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 mil / 60°12 mil+.

Target Plotters
	Gerber III/IV, S/750 Sprint Series Lettersmith.
	Anagraph Excel 1/1m
	Compugraphy

Our unique design enhancement reduces blade drag and improves cutting of small characters and graphics on standard pressure-sensitive materials. For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 mil / 60° 12 mil+.

Target Plotters
	TC-1101 / TC-1102 Turbo Cut Tools

Used in the TC-1101 or TC-1102 Turbo-Cut Tool for cutting 2-6 mil materials.

Target Plotters
	TC-1100 Turbo Cut Tool

Used in the TC-1100 Turbo-Cut Tool for cutting 2-6 mil materials

Target Plotters
	Anagraph, Excel-5 / Excel-2, Excel-EM

Substitute for ANAgraph 30010-01 30° and 3001 1-01 60° blades. For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-12 mil / 60° 12 mil+.

Target Plotters
	All Roland
	Allen Datagraph 936/800
	CSR Ecom-2
	Anagraph-EMS

SC-1345 is the substitute for Roland PRC 145-01 blades. For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 mil / 60° 12 mil+.

Target Plotters
	Ioline Studio 7/8 Artpro Series / Super 88 Techno-Arts Switchblades

For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 mil / 60° 12 mil+.

Target Plotters
	Ioline Studio 7/8 Artpro Series / Super 88 Techno-Arts Switchblades

For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 mil / 60° 12 mil+.

Target Plotters
	Houston-Inst. DMP Series
	HTD Density 4000
	Vytek 500 / 1000
	Newing-Hall
	Accutrac 439
	Jorlink

For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 milt (For cutting 12 mil see SC-1660 and SC-1760 blades) (For cutting 12 mil on the Newing-Hall Accutrac 439, see the SC-1760 blade)

Target Plotters
	Newing-Hall Accutrac 439

For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 milt (For cutting 12 mil see SC-1660 and SC-1760 blades) (For cutting 12 mil on the Newing-Hall Accutrac 439, see the SC-1760 blade)

Target Plotters
	Sungraf / Graphityp 19-D / 30-D

Similar to "Yellow", "Red" and "Blue" blades offered by plotter manufacturer, except GAP blade tips have the advantage of being constructed out of carbide, not stainless steel! Carbide tipped blades offer much better durability and longer performance. For best results, use the following recommended blade angles when cutting these material thicknesses: 26° (Yellow) 2-4 mil / 40° (Red) 4-12 mil / 59° (Blue) 12 mil+.

Target Plotters
	American Graphic Cutting Pro / FC-Series
	Nova Cut

Similar to CB-09U blade offered by plotter manufacturer, except GAP blade tips have the advantage of being constructed out of carbide, not steel! Carbide tipped blades offer much better durability and longer performance. For best results, use the following recommended blade angles when cutting these material thicknesses: 45° 2-6 mil / 60° 6 mil+.

Target Plotters
	Mimaki CG-Series

Similar to CB-09U blade offered by plotter manufacturer, except GAP blade tips have the advantage of being constructed out of carbide, not steel! Carbide tipped blades offer much better durability and longer performance. For best results, use the following recommended blade angles when cutting these material thicknesses: 45° 2-6 mil / 60° 6 mil+.

Target Plotters
	Aristo AR-20/AR-50 Lettering Systems, AG-50 AG-75 / AG-130 Signline Series.

For best results, use the following recommended blade angles when cutting these material thicknesses: 35° 2-6 mil / 60° 6 mil+.

Target Plotters
	Zeta CP30/CP3015

Available as a replacement for Zeta 910102-45° and 910189-60° blades. For best results, use the following recommended blade angles when cutting these material thicknesses: 45° 2-6 mil / 60° 6 mil+.

Target Plotters
	Gerber / Spandex Swivel Blades (Used on Gerber Router Systems)

Substitute for Gerber P42255A blades. For best results, use for cutting on 2-6 mil materials.

Target Plotters
	Techno-Arts / Ioline "Hot-Tip" with SP-1 tool holder

Substitute for Techno-Arts / loline SP-1 hot tip.

Target Plotters
	Sunny Plastics Tool

Substitute for the Sunny Plastics swivel tool.

Target Plotters
	K-Cad Adapted Plotters

Substitute for K-Cad RBL-A blades. For best results, use the following angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 mil / 60° 12 mil+.

Target Plotters
	Gerber GSX

Substitute for Gerber P44985B blade. For best results, use the following recommended blade angles when cutting these material thicknesses: 42° 2-6 mil / 60° 6 mil+.

Target Plotters
	Wild TA-30 / TA-41

Substitute for Wild type-15 dual edge blade. For best results, use for cutting on 2-4 mil materials.

Target Plotters
	All Roland
	Allen Datagraph 936 / 800
	CSR Ecom-2

Substitute for Roland ZEC-U1001 blade. Designed for cutting very small lettering and graphics. For best results, use for cutting on 2-6 mil materials.

Target Plotters
	Summagraphics T-Series (Insert Blade Holder)

SC-3036 is the substitute for Summagraphics 390-549 blade. For best results, use the following recommended blade angles when cutting these material thicknesses: 36° 2-12 mil / 60° 12 mil+.

Target Plotters
	Pre-Art CP-150
	Kroy

For best results, use for cutting on 2-12 mil materials.

Target Plotters
	American Graphic (New Holder)

Substitute for American Graphtec CB-15U. Designed for thick materials. For best results, use the following recommended blade angles when cutting these material thicknesses: 35° 2-12 mil / 60°12 mil +.

Target Plotters
	Summagraphics D-Series
	GRI

Substitute for Summagraphics 391-360. For best results, use the following recommended blade angles when cutting these material thicknesses: 35° 2-12 mil / 60°12 mil+.

Target Plotters
	Vytek Gem

SC-3431/62 is the substitute for Vytek 40-292-00 blade. For best results, use the following recommended blade angles when cutting these material thicknesses: 31° 2-12 mil / 62°12 mil+.

Target Plotters
	Zund P-700 / P-1200 / P-2000

35° and 60° is a substitute for the Zund 910-10 blade and the 37° is a substitute for the Zund 910-311 blade.

Target Plotters
	Anagraph AE-Series (Anagraph Express)

For best results, use the following recommended blade angles when cutting these material thicknesses: 45° 2-12 mil / 60°12 mil+.

Target Plotters
	K-Cad Cal-Comp

SC-3745 is the substitute for K-Cad RBL-B 45° blade. SC-3760 is the substitute for K-Cad RBL-B 60° blade. For best results, use the following recommended blade angles when cutting these material thicknesses: 45° 2-12 mil / 60° 12 mil+.

Target Plotters
	Mutoh XP-Series
	Gerber Emboss Track
	P-Cut 630 Creation

Substitutes for the Mutoh 300936 30°, 300937 45° and 300938 60° blades. For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 mil / 60° 12 mil+.

Target Plotters
	Wild-TA 2L

Substitute for the Wild-TA 2L blade. For best results, use the following recommended blade angles when cutting these material thicknesses: 33° 2-12 mil.

Target Plotters
	Gerber-Signer

Substitute for Gerber P47281 B 30° and P47282B 45°. For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-6 mil / 45° 6-12 mil / 60° 12 mil+.

Target Plotters
	Mutoh SC-Series

With brass coller. For best results, use the following recommended blade angles when cutting these material thicknesses 45° 2-12 mil / 60° 12 mil +

Target Plotters
	Ioline Studio
	7/8/Super 88
	Techno-Arts Switchblades

Available in 60º. Substitute for Ioline Cobra Blade. This blade has a verythin cutting tip with a .047 offset, requireing special handling. For best results, use the following angles when cutting these materials thickness 12 mil+.

Target Plotters
	Summagraphics D-Series
	GRI

Available in 60º. Substitute for Summagraphics 391-358 60º blade. This blade is heavier in construction for cutting thick materials. For best results, use the following angles when cutting these material thickness: 12 mil+.

Target Plotters
	Ioline Smartrac

This blade is heavier in construction for cutting thick materials. For best results, use the following angles when cutting these material thickness: 30º for 2-4 mil; 45º for 4-12 mil; 60º for 12+ mil.

Target Plotters
	Gerber Invision

For best results, use the following recommended blade angles when cutting these material thicknesses: 30° 2-4 mil / 45° 4-12 mil / 60° 12 mil+.

Target Plotters
	Wild-TA/10

Substitute for Wild-TA-10 blade. For best results, use this blade for cutting 2-12 mil. materials.

Target Plotters
	Gerber DCS 1500

Substitute for Gerber DCS 1500 plotter blade. For best results, use the following remmened blade anles when cutting these material thicknesses. 45° 2-12 mil. / 60° 12 mil. and up.

If you would like to place an order, or have questions on any product, please contact us:

By Telephone

800.385.5803

By Fax

818-247-3673

By E-Mail

sales@graphicsignsupplies.com

By Contact Form

Contact Form

By Mail

Graphic Sign Supplies
1435 Gardena Ave., #12
Glendale, CA 91204