ClearShield® is your first choice for all non-water-sensitive applications. We created ClearShield® using state-of-the-art resins and ultraviolet inhibitors that protect the substrate, ink, and the clear coating itself. These non-yellowing clear coatings have excellent exterior durability and are highly flexible.
Use ClearShield® on most substrates, including waterproof canvas, vinyl, banners, fiberglass, wood, metal, plastic, and paper. You can apply it over solvent-based inks and most water-based paint systems.
Use Instead of Film Laminates
Contains State-Of-The-Art UV Inhibitors
High-Performance
Highly-Flexible
Waterproof
Will Not Yellow
Use On Digital Output: Solvent Based Ink, Electrostatic, Thermal, Pigmented Ink (non water-sensitive)
Excellent for Non-Water-Sensitive Inks, Media, Materials, and Products
Easy Clean-Up With Soap And Water
Available In 4 Finishes: Gloss, Semi-Gloss, Matte, 200 Satin
ClearShield®: clear liquid laminate for non-water-sensitive ink/media combinations
ClearShield® is available in several versions. This chart gives you information about each product.
Version
Properties
How to Apply
Finish
ClearShield Original
Thickest film build. Suitable for vertical applications.
Spray, pad or foam applicator, roller.
gloss
semi-gloss
matte
ClearShield Type LL
Lower viscosity than original ClearShield. Same resin solids.
Spray,automated application equipment, and hand application with roller, pad, or foam applicators and window "mops."
gloss
semi-gloss
20° satin
matte
ClearShield Type C
Waterproof canvas applications (highly flexible). Also suitable for micro porous substrates to reduce or eliminate pinholes.
Use all techniques, including most automated equipment. Daige requires a special version. Daige product code WBCG1006 - Gloss.
gloss
semi-gloss
ClearShield VG
(Can be replaced with CSX)
Vehicle graphics. Highly flexible and chemical resistant.
Apply only on horizontal surfaces. Use all techniques, including most automated equipment (including Daige).
gloss only
ClearShield 20° Satin
ClearShield 20° Satin LL
Low gloss applications not requiring dead flat finish found in matte version. Better abrasion and mar resistance. Suitable for many wallpaper applications.
Use all hand application techniques. For automated equipment, specify Type LL.
20° satin
ClearShield
CSX3000LL
CSX4000
High and semi-gloss applications where the ultimate in durability and flexibility is needed. Can be used to replace ClearShield products except Type C.
CSX3000LL for spray
and automated machine application.
CSX4000 For any type of hand
application, including spray.
gloss
semi-gloss
ClearShield Anti-Graffiti Clear
Highly flexible, chemical and uv resistant. Two-component, water-based clear coat easily cleaned with solvent or Clearstar's non-petrochemical citrus based cleaner.
Use all techniques. Automated equipment requires reduction with water to working viscosity.
gloss
If you would like to place an order, or have questions on any product, please contact us:
ClearShield UV & 
